Accepting virtually any hand-held router motor, it can be
used as a floating table between your MARK V's
work table and Extension Table- or as an outboard unit, supported
by your Extension Table and Telescoping Legs.
of 1-1/4" thick double-refined MDF (medium density fiberboard),
ALL surfaces are laminate-covered for durability and smooth-gliding
threaded inserts in the table surface accept our optional,
Hold-In Featherboards for support when straight-line routing
against the Fences -- or our optional overhead Guard/Dust
Collection Pick-Up when routing freehand or using bearing
The patented Woodhaven Mounting Plate comes with a blank insert...a
2" hole insert...a 1" hole insert with a 1-3/16"
diameter bushing counterbore and a 1/2" diameter nylon
with instructions and mounting hole diagrams for 37 popular
is supported by four, Woodhaven Stay-True Plate Levelers
that can be adjusted to provide snag-free gliding action.
Each of the two rugged, extruded aluminum Fences mount quickly
and independently with twin knobs to the T-Track in the top
of your Pro Fence System Rip Fence.
Fence offers more than enough left/ right travel to provide
the ideal bit clearance for optimal workpiece support...whether
you're working with a 1/8" diameter straight bit or a
giant, 3" or larger diameter panel-raising bit.
position of each fence half is controlled by turning a large,
four-wing adjustment knob. Each 1/4-turn provides a precise,
1/128" of micro-adjustment.
the vacuum port on either half of the fence to a 2-1/2"
diameter hose for super-efficient dust-collection. A 2-1/2"
elbow is included (and required) for attaching the hose to
either of these ports. For even greater efficiency, order
an additional, optional elbow and connect a Dust Collector
hose to EACH fence end.
see-through upper guard provides eye protection and helps
seal off the gap between the two fences for added dust collection
out the Pro-Fence System Router Table
in the Accessory Catalog Today!