Weekend
Project
Article

JULY/AUG 2004
Volume 47/Issue 4

IN THIS ISSUE
Project Articles
• Antique Quilt Display Rack
• Heart-Shaped Display Stand
• Duck Napkin Holder

DEPARTMENTS
• Ask Smitty
• Owner’s Gallery
• Letters from Owners
• New Baby Workshop Calendar
 
Academy Notes
Hardwood Information You Should Know - Pt 1
 
Service Pointers
MARK V Alignment

Woodworking Technologies
New Woodworking Glues
 
Safety
Safety Lessons I've Learned

What's New
The Shopsmith Gift Card

EDUCATION
• Find A Shopsmith Woodworking Academy Near You
• National Woodworking Academy in Dayton, OH

ONLINE CATALOGS
• Online Accessory Catalog
• Request Printed Accessory Catalog
• Online Replacement Parts Catalog

MARK V INFORMATION
• Find A Shopsmith
MARK V Demo Near You
• Request MARK V Information Package

LINKS
• Links Worth Visiting
• Free Woodworking Tips

FEEDBACK
Contacting Shopsmith

Copyright 2004.
Shopsmith, Inc.
All Rights Reserved

The Heart-Shaped Display Stand

7. Again, while the shelves are still taped together, use a Strip Sander or one of Shopsmith's all-new, 6" long Drum Sanders to sand the outside edges smooth to your line. NOTE: If you're using a Drum Sander, you'll still have to hand-sand the notch at the top of each heart-shaped shelf.

8. Cut the Legs (B) to size, according to the List of Materials.

9. Following the dimensions shown in Fig. 3, use your Dado set-up to cut the 3/4" wide by 1/4" deep shelf support dadoes in the Legs (B).

10. Use your Shaper set-up with a Quarter-Round & Cove Bit ---- or your Router set-up with a 1/4" Router Chuck and 3/8" Round-Over Bit to round-over your shelf edges. NOTE: Be careful not to round-over in the three areas where the Shelves (A) attach to the Legs (B).

11. Counterbore 3/8" diameter x 1/4" deep holes on the outside of the Legs (B), centered over your dadoes (Fig. 3), then drill through for the screw shanks.

12. Assemble the Stand as shown in Fig. 4 using 1-1/2" x #6 wood screws. Cover the screw heads with dowel hole plugs and sand flush.

13. Apply the finish of your choice and enjoy!

List of Materials...